Polaris Ranger 1000 XP Windshield Version Guide
Polaris Ranger 1000 XP Windshield Version Guide
Polaris and aftermarket suppliers have shipped the Ranger 1000 XP (2018-current) with several windshield styles. The difference is where the mounting cut-outs and latch notches sit. Pick the version below that matches your glass, and the tint will line up with every notch.
Step 1: Fixed or tip-out?
Fixed windshields don't move. Tip-out windshields hinge at the top and swing out at the bottom, with a latch at the bottom edge.
Step 2: Look at the cut-outs
Stand in front of the machine and note where the glass has notches or cut-outs for mounts and latches: top edge, top center, sides, or bottom.
| Type | Version | What your windshield looks like |
|---|---|---|
| Fixed | Version 1 | Cut-outs along the top edge only |
| Fixed | Version 2 | Cut-outs on the top edge and both sides |
| Fixed | Version 3 | Cut-outs on the sides only, nothing on top |
| Fixed | Version 4 | No cut-outs at all (smooth frame) |
| Fixed | Version 5 | One cut-out at the top center plus both sides |
| Fixed | Version 9 | Cut-outs at the top center and bottom center |
| Tip-out | Version 6 | Two angled latch cuts at the bottom (left and right) |
| Tip-out | Version 7 | One square latch cut at the bottom center |
| Tip-out | Version 8 | Cut-outs on the upper sides and both side edges |
| Banner | Banner V1 | Stops at the black frit band; NorthStar Ultimate/Premium |
| Banner | Banner V2 | Extends below the frit band; no top-side mount cut-outs |
Still not sure?
Send us a photo of your windshield from the front, with the top and bottom edges in the shot, and we'll tell you which version to order. It takes us a few minutes and saves a wrong cut.
