RokShell clear windshield protection film kit for the CFMOTO U10 / U10 XL
CFMOTO UForce U10 XL Pro Highland with pre-cut windshield protection film, coverage area outlined in blue
RokShell UTV windshield protection film logo
    RokShell clear windshield protection film kit for the CFMOTO U10 / U10 XL
    CFMOTO UForce U10 XL Pro Highland with pre-cut windshield protection film, coverage area outlined in blue
    RokShell UTV windshield protection film logo
RokShell clear windshield protection film kit for the CFMOTO U10 / U10 XL
CFMOTO UForce U10 XL Pro Highland with pre-cut windshield protection film, coverage area outlined in blue
RokShell UTV windshield protection film logo

RokShell CFMOTO UForce U10 / U10 XL Windshield Protection Film – 8 Mil Pre-Cut Kit

Regular price
$299.00
Sale price
$299.00
Regular price
Recommended Add-On
Tint Masterkit: hard card, pink soft squeegee, gasket tool, scrub pad, razor blades and tint application soap

Tint Masterkit - Window Tint Install Tool Kit

3 pro tools • blue scrub pad • 5 razor blades

$28.00

Pro Install Gel 16 oz tint application spray bottle - UTV Window Tint

Pro Install Gel - Window Tint & PPF Slip Solution (16 oz)

16 oz tint gel • more slip time • easier installs

$12.99

Regular price
$299.00
Sale price
$299.00
Regular price

Express Shipping

Product Details

One rock off the trail can chip your windshield. RokShell takes the hit instead.

The factory glass windshield on your CFMOTO UForce U10 or U10 XL is one of the most expensive parts on the machine to replace. Gravel roads, the machine in front of you, branches and even grit dragged across the glass by your wiper all wear it down, and a small chip can spread into a crack that means a new windshield.

RokShell is a clear 8 mil protection film that goes on the outside of your windshield. Rocks, sand and debris hit the film first, so the glass underneath stays clean. If the film ever gets beat up, you peel it off and put on a new piece. Replacing film costs a fraction of replacing glass.

Why riders choose RokShell

✓ Helps prevent rock chips, scratches and trail wear on your factory glass
✓ Clear and virtually invisible once installed, so your machine looks stock
✓ Hydrophobic top coat that helps shed water and mud
✓ Safe to use with your wiper
✓ Removable and replaceable when it's worn

Precut for the U10, not trimmed off a roll

Every kit is computer-cut from a pattern we made and test-installed on our own CFMOTO U10. There's no measuring or trimming on your windshield. Lay it on, squeegee it out, and you're done in about 30 minutes. We've been installing tint and film for 15 years, and every order ships with a QR code that links to the install video.

Make sure it fits

This kit is made for the CFMOTO UForce U10 / U10 XL factory glass windshield, including the Pro Highland. It won't fit polycarbonate windshields, aftermarket glass with a different shape, or heavily modified windshields. Not sure? Factory glass has a printed stamp in a lower corner and doesn't flex when you press on it.

Good to know

RokShell doesn't make glass unbreakable. It's a replaceable layer that helps stop the everyday chips and scratches that ruin a windshield over time. For the best result, install it in a garage or shade on clean glass, and let it cure before you wash the machine.

Is this tint? No. RokShell is completely clear. It won't darken your windshield.

Can I still use my wiper? Yes. Just keep the wiper blade clean so trapped grit doesn't wear the film early.

How to use:

Spraying down a CFMoto U10 windshield before installing RokShell

STEP 1

Spray the windshield down to loosen dirt, wax and coatings, ideally in a garage or shade.

Scrubbing the windshield and squeegeeing it clean

STEP 2

Scrub the glass, then squeegee it clean so nothing gets trapped under the film.

Laying the RokShell film onto the wet windshield

STEP 3

Peel the liner, spray the glass and film with install gel, and slide the film into place.

Shop Pro Install Gel
Squeegeeing the water out from under the RokShell film

STEP 4

Squeegee the water and gel out from the center to the edges. Let it cure before washing.

Watch the full install

One rock can cost you a windshield

Replace factory glass
$1,199
plus install, plus days off the trail waiting on parts
RokShell kit
$299
When it's beat up, replace the film, not the glass.
Gear that pairs with your RokShell kit

Complete Your Build

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
C
Curtis H
Peace of Mind

We ride a lot of gravel roads and trails, so protecting the windshield was a no brainer. The film is clear and doesn't change the look of the machine.

M
Mark T
VERY EASY

This is such a easy install and you can tell that this would protect your glass for sure!